---------------------------------------------------------------------------
NC Drill File Report For :  sample.PCB   7-Jul-1992   23:32:08
---------------------------------------------------------------------------

Layer Pair : Top - Bottom
ASCII File : sample.TXT

Tool         Hole Size          Hole Count        Tool Travel
---------------------------------------------------------------------------
T1        30 Mil (0.750 mm)        194       56.14 Inch (1426.06 mm)
T2        32 Mil (0.825 mm)        28        9.48 Inch (240.89 mm)
T3        35 Mil (0.900 mm)        291       54.54 Inch (1385.44 mm)
T4        40 Mil (1.025 mm)        25        8.73 Inch (221.64 mm)
T5        125 Mil (3.175 mm)       2         6.81 Inch (172.95 mm)
---------------------------------------------------------------------------
Totals                             540       135.71 Inch (3446.98 mm)
---------------------------------------------------------------------------
Totals                             540       135.71 Inch (3446.98 mm)

Total Processing Time : 00:00:07
Note this is an Example of what a TOOL TABLE should Look Like

Each tool (Drill Bit) is made unique by defining a "Tn" where n=1 to n number
of different drill sizes.

The Hole Size is the size the hole is to be drilled before Plating..REMEMBER
there will be approx .003" of Copper and Solder plating in the hole after it
has been drilled..be sure you allow for this when you spec your inital sizes.

The Hole Count is not essential but it is a nice option if your system can
generate it.  The Tool Travel is another optional add in.